How to turn an eWater Standalone System on and off
Turning your eWater Standalone System on and off is quick and simple. This article explains how to start the system, dispense solution, and turn it off safely for day-to-day use.
Video: Turning the eWater Standalone System on and off
How to turn the system on
The system can be activated in two ways:
Option 1: Dispense button
-
Press the Dispense On / Off button on the front panel.
-
The system will start producing solution.
Option 2: Hand sensor
-
Place your hand under the hand sensor.
-
The system will activate automatically.
Once activated, the system will begin its start-up cycle.
What to look for when the system is ready
-
The green Ready light will flash briefly during start-up.
-
When the Ready light stops flashing and remains steady, the system is producing eWater.
-
Cleaner or sanitiser can now be dispensed.
If the Ready light continues flashing, the system is not yet producing solution.
How to turn the system off
To turn the system off:
-
Press the Dispense On / Off button again
or
-
Remove your hand from the sensor and allow the system to stop dispensing
The system will safely shut down and stop producing solution.
If the system does not turn on
If:
-
The Ready light does not become steady
-
No solution is dispensing
-
Warning or error lights are displayed
Refer to:
-
Understanding system lights and error codes
-
Or contact the eWater support team for assistance 1300 EWATER